Market Venture Philippines Inc.  
  Mabuhay 3.239.3.196!
 
 
  Home
  Products
  About Us
  Resource Links
  Site Map
  Contact Us
  Inquiry
  Privacy Policy
 
   
  Communication Systems
  Consumer Products
  Electronic Tools
  Industrial Tools
  Security Products
 
  Find it here  
Search Help | Advance Search
1004953
 

 

Our Products Electronic Tools Technart

 

Back
   
 
 
MG,SG, and AG ESD series Drivers
 
Product Code:  ESD Series
Brand Name:    Technart
 

Description


Torque Drive

The systems table shows the torque range for the M-Series (hand operated). The RPM is automatically selected in accordance with the torque value you program in the controller.

Each model has the ability to switch to either standard or high speed using the customized software.

If you require any specific RPM for a certain fastening torque, please feel free to contact a customer service representative. We need to know your specific fastening torque in use, so we can determine if the RPM you require can be achieved.

Model

Output

Setting

Minimum

Standard Speed High Speed
1200

0.3-1.2

0.24-1.35

0.01

350-1,300

-

2200

0.5-2.2

0.5-2.4

0.02

130-750

-

3600

1.0-3.6

0.8-4.0

0.02

160-540

270-780

8500

2.0-8.5

1.6-10.0

0.01

60-320

100-650

12K

3.0-12

2.7-13.0

0.1

40-160

150-500

15K

4.0-15

3.5-16.5

0.1

30-100

150-450

20K

5.0-20

4.5-22.0

0.1

25-110

60-250

30K**

7.0-30

7.0-30

0.1

25-110

40-160


**Not offered in M-Series

Models are available with torque range in Lbf.in

MG, SG, and AG ESD Series Drivers

For most critical ESD sensitive environments, what we can offer optionally is Continuous Bit Grounding Mechanism. Conductivity of the bit is continuously maintained even during the driver motor and bit rotation, with less than one ohm.

Available for A series, S series and M series driver units.

Drivers

Description

Bit

System Models

M

S

A

SD

-

-

Without bit cushion

4 mm Dia. D-Cut

1200, 3600, 8500, 12K

FD

-

-

With bit cushion

4 mm Dia. D-Cut

1200, 3600, 8500, 12K

SH

-

-

Without bit cushion

1/4" Hex

8500, 12K, 15K, 20K

FH

-

-

With bit cushion

1/4" Hex

8500, 12K, 15K, 20K

-

SD

SD

Without bit cushion

4mm Dia. D-Cut

1200, 2200, 3600, 8500, 12K

-

FD

FD

With bit cushion

4 mm Dia D-Cut

1200, 2200, 3600, 8500, 12K

-

-

SH

Without bit cushion

1/4" Hex

8500, 12K, 15K, 20K, 30K

-

-

FH

With bit cushion

1/4" Hex

8500, 12K, 15K, 20K, 30K


Model Number Configuration

The product line-up offers several choices to meet your requirements. The following will explain how to specify a model.

System (a controller + a driver unit) =

Controller Models: PED III and FED III
Model Series: M, S and A
Driver Unit Models: 1200, 2200, 3600, 8500, 12K, 15K, 20K and 30K
Configurations: SD, FD, SH, and FH

Example: PED III-M 8500-SH

Bit Sleeve & Guide
A bit sleeve is unique to the application. In order to complete the order for your system, we require:

  • Sample of a fastener or dimensions of fastener
  • Specific driver style being used
  • Shank diameter
  • Special requirements i.e. space restrictions

Custom Options and Settings

User-friendly Windows 95/98/NT® based software is available to customize the functions and parameters of the PED III or FED III controller.


Custom Functions

  • LED (for M and S drivers)
  • Screw binding release
  • Trigger switch and forward/reverse switch (for M and S drivers)
  • Dual torque: Manual or Auto change-over (for PED III)
  • Slow start for initial engagement to minimize shock and cross threading of fasteners.


User Parameter Settings

  • Changeable unit measure (kgf.cm, N.m, Lbf.in)
  • Driver unit LED functions
  • Standard speed fastening setting
  • High speed fastening setting
  • Holding time of peak torque (0-200ms)
  • Screw binding release function parameters
  • Reversing parameters (FED III only)
  • Idle mode parameters (FED III only)
  • ATC (Auto Torque Compensation) fine-tuning to adjust the mechanical characteristics of the driver unit.


Multi-Sequence Operation

A programmable multi-sequence operation without a PLC (FED III) is available with the customized software.

 

 



 
 


Copyright © 2024 MVENT PHILIPPINES, INC. | PRIVACY POLICY