The systems table shows the
torque range for the M-Series (hand operated). The RPM is automatically selected
in accordance with the torque value you program in the controller.
Each model has the ability to
switch to either standard or high speed using the customized software.
If you require any specific RPM
for a certain fastening torque, please feel free to contact a customer service
representative. We need to know your specific fastening torque in use, so we can
determine if the RPM you require can be achieved.
Model
Output
Setting
Minimum
Standard
Speed
High
Speed
1200
0.3-1.2
0.24-1.35
0.01
350-1,300
-
2200
0.5-2.2
0.5-2.4
0.02
130-750
-
3600
1.0-3.6
0.8-4.0
0.02
160-540
270-780
8500
2.0-8.5
1.6-10.0
0.01
60-320
100-650
12K
3.0-12
2.7-13.0
0.1
40-160
150-500
15K
4.0-15
3.5-16.5
0.1
30-100
150-450
20K
5.0-20
4.5-22.0
0.1
25-110
60-250
30K**
7.0-30
7.0-30
0.1
25-110
40-160
**Not offered in M-Series
Models are
available with torque range in Lbf.in
S-Series Drivers with automatic recognition
The S-Series driver units have a
forward/reverse with a lever type on/off switch that activates the motor. The
S-Series drivers can be connected to both the PED III and FED III controller and
is used in hand operated applications. The S-Series drivers are equipped with a
4mm diameter D-Cut quick-change chuck. The FD model is equipped with a bit
cushion mechanism. The bit has a moveable range of 10mm in the axis direction.
The driver unit can keep the same bit pressure anywhere within the moveable
range.
